The Golden Egg | Update
In this Instuctable I updated a previous project of mine. Here is a link towards that Project:
Things You'll Need
For this project I used:
- Arduino UNO
- Adafruit NeoPixel Ring - 16 x 5050 RGB LED with Integrated Drivers
- SD Card Module Reader AMS1117 3.3 H1518
- 1x Transistor BC547B
- 1x Transistor BC639
- 10k Ohm Resistor
- 2x Speakers, 8 ohm, 0.5W
- Male to Female cables
- Diode 1N4004
- 3x 1k 1% Ohm Resistor
- 3x Button
Schematic
This is how I planned out the wires.
Code
Downloads
Finished Product
This Is how it all turned out.
To see how I made the add and hided the wires, I suggest you check out the previous instructable: