The Flat-Pack Dall'interno
![FPNLDNMKUTTBTZA.png](/proxy/?url=https://content.instructables.com/FR2/VCP2/KUTTBTZH/FR2VCP2KUTTBTZH.png&filename=FPNLDNMKUTTBTZA.png)
![FFDS5EBKUTTBUVK.png](/proxy/?url=https://content.instructables.com/FMD/SQSB/KUTTBUVY/FMDSQSBKUTTBUVY.png&filename=FFDS5EBKUTTBUVK.png)
![Screen Shot 2021-10-16 at 6.43.51 PM.png](/proxy/?url=https://content.instructables.com/FPQ/R02Q/KUTTBV03/FPQR02QKUTTBV03.png&filename=Screen Shot 2021-10-16 at 6.43.51 PM.png)
The Flat-Pack Project- The Dall'interno
meaning "from within"
-a lamp made to be able to ship flat and be assembled easily by customer using only laser cutting
Supplies
![Screen Shot 2021-10-15 at 12.39.15 PM.png](/proxy/?url=https://content.instructables.com/FLW/2OTK/KUTTBURD/FLW2OTKKUTTBURD.png&filename=Screen Shot 2021-10-15 at 12.39.15 PM.png)
- three pieces paper
- one laser cut thin/lite plywood
- small laser cut acrylic pieces
- lightbulb
Mainly Assembly
![Screen Shot 2021-10-16 at 6.36.53 PM.png](/proxy/?url=https://content.instructables.com/F45/7ADG/KUTTBUK0/F457ADGKUTTBUK0.png&filename=Screen Shot 2021-10-16 at 6.36.53 PM.png)
![Screen Shot 2021-10-16 at 6.37.19 PM.png](/proxy/?url=https://content.instructables.com/FAZ/NCZK/KUTTBULH/FAZNCZKKUTTBULH.png&filename=Screen Shot 2021-10-16 at 6.37.19 PM.png)
![Screen Shot 2021-10-16 at 6.37.26 PM.png](/proxy/?url=https://content.instructables.com/FRY/G885/KUTTBUMY/FRYG885KUTTBUMY.png&filename=Screen Shot 2021-10-16 at 6.37.26 PM.png)
For the steps I mainly stuck to simple cuts creating a way to connect the pieces of paper using the acrylic pieces to create a tri-layer shading effect
-there are simple cuts in the bottom plywood base to connect the pieces of paper to, to create the stand up curled effect allowing the light to leak out the bottom in a structured way