The Easiest Dollar Bill Ring
by Jazzy13 in Workshop > Molds & Casting
3835 Views, 30 Favorites, 0 Comments
The Easiest Dollar Bill Ring
I have made a simple ring out of a US dollar. If you have a different currency you can do it with that. You can also do this with a piece of printer paper. I will make an instructable on how to do that soon.
This takes a minimum of about 2 minutes to do and only costs a dollar!
Things needed;
1 dollar or
a piece of printer paper cut to the dimensions of 15.6 cm by 6 cm
My answers to; Make to learn
What did you make?
I've made a ring out of a dollar bill. Anyone can use any bill even printer paper.
How did you make it?
I'e made this out a dollar bill. After seeing some of the similar instructables I decided to make a easier one. The first one iI saw was too hard to follow.
Where did you make it?
I made this 100% at home. This project connected to other parts of my life with the jewerly concept.
What did you learn?
I learned how to create oragami, without getting to stressed. If I was to do it again I would make extra neat folds and use a really crisp dollar bill. I honestly dd not have any surprises or challenges alng the way.
This takes a minimum of about 2 minutes to do and only costs a dollar!
Things needed;
1 dollar or
a piece of printer paper cut to the dimensions of 15.6 cm by 6 cm
My answers to; Make to learn
What did you make?
I've made a ring out of a dollar bill. Anyone can use any bill even printer paper.
How did you make it?
I'e made this out a dollar bill. After seeing some of the similar instructables I decided to make a easier one. The first one iI saw was too hard to follow.
Where did you make it?
I made this 100% at home. This project connected to other parts of my life with the jewerly concept.
What did you learn?
I learned how to create oragami, without getting to stressed. If I was to do it again I would make extra neat folds and use a really crisp dollar bill. I honestly dd not have any surprises or challenges alng the way.
The First Fold
Step 1;
Put the bill president side up.
Look along the top and you'll see a thin blackish, green line ( above the persons head)
Fold the top of the the dollar along that
Make sure to crease your folds!!!!!!
Put the bill president side up.
Look along the top and you'll see a thin blackish, green line ( above the persons head)
Fold the top of the the dollar along that
Make sure to crease your folds!!!!!!
The Second Fold
Step 2;
Fold that bill in half
Now open that little flap created
Place that part just folded in that flap
Fold that bill in half
Now open that little flap created
Place that part just folded in that flap
The Third Fold
Step 3;
Fold the bill in half again
Make sure the bill is The United States of America (or what yours says) up
Also make sure there is a number on the very left
Fold the bill in half again
Make sure the bill is The United States of America (or what yours says) up
Also make sure there is a number on the very left
The Fourth and Fifth Fold
Step 4 & 5;
Fold the light part beside the number inwards
Then nextly fold the right side of the one. Folds it so it looks like a square
Fold the light part beside the number inwards
Then nextly fold the right side of the one. Folds it so it looks like a square
The Sixth Fold
Step 6;
Fold the boxed 1 back
Fold the boxed 1 back
The Wrap (step 7)
Step 7;
Wrap the long strip around your finger a couple times. This will help give the ring it's shape.
Wrap the long strip around your finger a couple times. This will help give the ring it's shape.
The Eighth Fold
Step 8;
Take some of the strip and fold it up 45 degrees.
A good spot is between the O and the F in the US of America
Move the upward strip in differnent spots for different sizes
Take some of the strip and fold it up 45 degrees.
A good spot is between the O and the F in the US of America
Move the upward strip in differnent spots for different sizes
The Second "Wrap"
Step 9;
Wrap the strip around to meet behind the 1
Wrap the strip around to meet behind the 1
The Tenth, Eleventh and Last Fold
Step 10;
Open the number
Bring the vertical tap (strip) down to the inside of the number
Step 11;
Wrap the tab behind the number again. There will be a little bit left. Pull it tightly and lay it inside the number
* not pictured
Step 12;
Close the number. With that little tap, stick it inside the little pocket created by the strip
Congragulations! You're done! Have fun and Enjoy!
Don't forget to vote!
* A more explainary video will be put up soon
Open the number
Bring the vertical tap (strip) down to the inside of the number
Step 11;
Wrap the tab behind the number again. There will be a little bit left. Pull it tightly and lay it inside the number
* not pictured
Step 12;
Close the number. With that little tap, stick it inside the little pocket created by the strip
Congragulations! You're done! Have fun and Enjoy!
Don't forget to vote!
* A more explainary video will be put up soon