The Creation of JARV

This is Jarv the robot!

I made Jarv on a website called Tinkercad an online 3D modeling program

for the toes i used a half foot piece and cut it to the way i like.

for the foot i used a cylinder piece and cut it in half.

for the heel of the foot i used a roof piece. and for the leg i used a paraboloid piece and stretched it out.

for the hip i used a dice piece and shaped it the way i wanted.

for the belly i used a sphere and shaped it the way i wanted.

i also added a polygon piece inside the belly to make it longer.

the neck is a sphere with the steps turned down.

the head is a box the the edges rounded.

for the face features i used blockhead piece and cut it to where it only had the front of the face showing.

for the arm/gun on the left i used cylinders for both pieces.

for the arm/flamethrower on the right i used storm cloud piece and cut it to just one lightning bolt and attached it to the cylinder on the right.

this is the final piece. took me about of week of class time to get this finished and posted, very fun to make and plan on doing more.