The Cardboard Marble Race

Race your marbles and be careful which way you turn or you could up in jail. First to the finish lines wins

You will need cardboard, marbles, glue, scissors, pencil, marker, tape and a ruler

Cut a base about 27 in. long and 21 in. wide for your marble race.

you will want to construct a tower 14 in. high

Construct a square top that is 11 in. wide add wall and make marble guides.

Construct tubes that are 10 to 14 in. long and have a circumference of 3 1/2 in.

make turns that have an average 5 in. long and have 3 1/2 in. circumference. cut and bend the the cardboard to make them.

Make a turn but have a hole on one side in the middle then cut slits in the tube too put in release. Then add it to your tower

This will tube will need to be cut with frilled ends so that it can be attached to the tower

You will need to connect turns to the custom tower tube.

create a Plinko so that your marble can split paths

Create mechanism inside your jail so that it needs player interaction to escape

Construct triangle base for your Plinko and jail

Attach tubes to Plinko and jail to take the marble to the finish line

You have completed your marble race. Now you can challenge family and friends to race you for fun or for glory.