The Bischoff 720 A.T.S (Accurate Targeting System)

Check my Scorpion 360 C.D.M too!

Here it is: The Bischoff 720 A.T.S

This is my biggest and most sweet knex gun, and the shooting system is inspired on Killerk's firing system
It has a range of at least 175 ft and the accuracy is up to 110 ft!
I think it's my personal best because of the range.
Very fun when sniping on targets.

Pros:

-Kick ass design
-Can pierce a bucket from a distance of 3.5 m
-True trigger
-Two handles
-Very accurate
-Very powerful

Cons:

-The bipod isn't foldable

For short:
It's a very recommandable sniper rifle.

Rods:
12 greys
8 reds + 1 red (bullet)
7 yellows
29 blues
114 whites
108 greens

Connectors:
110 yellows
44 greens
18 light greys
28 oranges
22 greys
32 reds
6 whites
2 dark blue

Exotics:
1 tan clip
2 metallic blue clips
3 y-shaped connectors
8 blue spacers
2 gray spacers

Also needed:
2 rubberbands
1 snapped rubberband
1 small rubberband
normal tape
duck tape

This is what you'll need to make the gun.

This part isn't necassery but it makes the stock a lot more resistance proof.

This part is for letting go of the bullet when you pull the trigger.

The most time consuming and finger torturing part of the gun, but it's necassery.

This part is very necassery, assuming that it locks the bullet in place

This part isn't necassery but it comes in handy when sniping because you will have a stable base to aim.

build it twice.

This part is to tie the rubberband in place and so that you can pull back the band.

This part is pretty important for looks, strength and, it makes a comfortable handling when shooting.

Pic 5 needs to be built twice.

This part is required because if you would'nt put it on, the barrel would be all shaky and that's a less accurate shot, which is annoying.

These parts are for a more comfortable handling of the gun.
and they spare you some painful fingers.

Connect the two bi-pod sides as shown.

pic 1: get the pieces
pic 2: bullet holder + barrel
pic 3: put them together
pic 4: barrel + barrel bars
pic 5: put them together
pic 6: rubberband holder + barrel
pic 7: put them together

Barrel Completed.

Connect the trigger as shown on the pics.

pic 1: Trigger + Stock
pic 2: Put them together.
pic 3: Trigger and Barrel + Handles
pic 4: Put them together.

Basic model completed.
View next steps on how to load, which ammo you should use, how to put the trigger rubberbands and how to assemble the Bi-Pod.

The bullet is a red rod with a tan clip on the front and duck tape on the back for some stabilising when in the air.

Put the rubberbands as shown.

Put the firing band behind the tan clip.
pull it back.
click it on the y-shaped connector.

Put on the bi-pod as shown on the pictures.

Well,
You've built yourself the Bischoff 720 A.T.S
Have freaking much fun with my knex gun!!!