The 8er

Here were going to be building a wind power device. This was a assignment we were given by our teachers.

You need a 3 and a half inch cup, and 10 rocks, hot glue gun, 8 spoons, 3 inch wood wheel, 1 foot 4inch pvc pipe, 1&half inch wooden wheel, and 14 metal cm balls, and 1 3 volt DC motor.

Glue the pvc pipe to the bottom of the cup.

Then fill the cup with the rocks then (this thing is optional you can hot glue the rocks to the cup around the pvc pipe).

Take the smaller wooden wheel and glue it to the top of the pvc pipe and the glue the motor on the smaller wooden wheel.

Then glue the spoons to the big wooden wheel. You want the spoons all facing the same direction (right).

Then attach the wooden wheel to the motor and hot glue around the the tip of the motor. (make sure not to glue the base of the tip)

Glue the metal balls to the spoons distribute them evenly.

Then your done with the 8ER.