Ten-minute Mousetrap Airsoft Mine With Tripwire
by werion5 in Outside > Launchers
12763 Views, 31 Favorites, 0 Comments
Ten-minute Mousetrap Airsoft Mine With Tripwire
This is an easy to make airsoft trip mine using only household items and a wooden mousetrap.
You Will Need:
A mousetrap
Duct tape
4 big nails
2 zip ties
A medicine box
Scissors
A power drill
Some fishing line
Duct tape
4 big nails
2 zip ties
A medicine box
Scissors
A power drill
Some fishing line
Drilling the Holes
First of all, drill 5 holes in the shown spots.
Reducing the Movement
Reduce the mousetrap's movement with a zip tie. WATCH YOUR FINGERS!!!
Cut the extra part off.
Cut the extra part off.
Preparing the Box
Reinforce and cut the box like so:
Attaching the Box
Stick a piece of duct tape like this and attach the box.
The Tripwire
Attach the fishing line to one of the nails with duct tape and roll it around the nail.
The Tripwire Part B
This is the easiest step:
Roll duct tape around another nail until it loots like this.
Roll duct tape around another nail until it loots like this.
Tying the Tripwire
Tie the tripwire to the trigger. If you can't tie it, use duct tape.
How to Use
Place the trap on the ground. Jab the nail into the ground trough the hole. Loop the tripwire around the nail. Put the 2 extra nails trough the two holes on the back. Unwind the tripwire.
Load the trap and fill the box with BB's.
Congratulations!
You have now made and set an airsoft claymore mine!
Load the trap and fill the box with BB's.
Congratulations!
You have now made and set an airsoft claymore mine!