Temple: Placing the Columns
by tinkercad-support in Workshop > 3D Printing
680 Views, 1 Favorites, 0 Comments
Temple: Placing the Columns
![Temple walkthrough_0019_Layer 8.jpg](/proxy/?url=https://content.instructables.com/F5F/JVYF/J58FXT27/F5FJVYFJ58FXT27.jpg&filename=Temple walkthrough_0019_Layer 8.jpg)
Now it's time to place the columns.
Instructions
- Find the columns and select them.
- Continue to the next step.
Move the Columns
![Temple walkthrough_0018_Layer 9.jpg](/proxy/?url=https://content.instructables.com/FNU/YNW8/J58FXT23/FNUYNW8J58FXT23.jpg&filename=Temple walkthrough_0018_Layer 9.jpg)
Continue positioning the columns.
Instructions
- Move the columns so that they cover the gaps between the walls/arcs.
- Continue to the next step.
Copy Pointed Dome
![Temple walkthrough_0017_Shape 1.jpg](/proxy/?url=https://content.instructables.com/FFN/12US/J58FXT20/FFN12USJ58FXT20.jpg&filename=Temple walkthrough_0017_Shape 1.jpg)
Time to add the pointed domes.
Instructions
- Find the pointed dome and position the camera to see the bottom.
- Press W to choose the Workplane Tool and select the bottom surface.
- With the pointed dome selected, press CTRL+C to create a copy in the clipboard.
- Continue to the next step.
Paste Copy of Pointed Dome
![Temple walkthrough_0015_Ellipse 1.jpg](/proxy/?url=https://content.instructables.com/FYC/1AHO/J58FXT1T/FYC1AHOJ58FXT1T.jpg&filename=Temple walkthrough_0015_Ellipse 1.jpg)
Make more copies of the pointed dome.
Instructions
- Press W to choose the Workplane Tool and select the top surface of the column.
- Press CTRL+V to paste a copy of the pointed dome on top of the column.
- If the dome is pointing down, rotate it so that it is pointing up.
- Continue to the next step.
Continue Adding the Domes
![Temple walkthrough_0014_Layer 13.jpg](/proxy/?url=https://content.instructables.com/FQ8/67KF/J58FXT1P/FQ867KFJ58FXT1P.jpg&filename=Temple walkthrough_0014_Layer 13.jpg)
Keep up the good work, continue adding the domes.
Instructions
- Make a duplicate of the pointed dome and move it to the opposite column.
- Continue to the next step.
Copy the Column Base
![Temple walkthrough_0013_Ellipse 2.jpg](/proxy/?url=https://content.instructables.com/FGL/C9N0/J58FXT1N/FGLC9N0J58FXT1N.jpg&filename=Temple walkthrough_0013_Ellipse 2.jpg)
Now we need to add the column base to each column.
Instructions
- Copy the base of the columns to cover the next two corners of the wall/arch.
- Continue to the next step.
Copy the Small Dome
![Temple walkthrough_0012_Shape 2.jpg](/proxy/?url=https://content.instructables.com/FIG/P3FY/J58FXT1J/FIGP3FYJ58FXT1J.jpg&filename=Temple walkthrough_0012_Shape 2.jpg)
Repeat the process to the small dome.
Instructions
- Press W to choose the Workplane Tool and position the camera to see the bottom of the small dome.
- Select the bottom surface of the dome.
- With the dome selected, press CTRL+C to copy small dome.
- Continue to the next step.
Paste the Small Dome
![Temple walkthrough_0011_Layer 16.jpg](/proxy/?url=https://content.instructables.com/FXT/533E/J58FXT1I/FXT533EJ58FXT1I.jpg&filename=Temple walkthrough_0011_Layer 16.jpg)
Instructions
- Position the camera to view the uncapped column.
- Press W to choose the Workplane Tool and select the top surface of the column.
- Continue to the next step.
Paste Copy of Small Dome
![Temple walkthrough_0009_Layer 18.jpg](/proxy/?url=https://content.instructables.com/FQT/QSM7/J58FXT1D/FQTQSM7J58FXT1D.jpg&filename=Temple walkthrough_0009_Layer 18.jpg)
Instructions
- Press CTRL+V to paste a copy of the pointed dome on top of the column.
- If the dome is pointing down, rotate it so that it is pointing up.
- Continue to the next step.
Duplicate Small Dome to Other Side
![Temple walkthrough_0008_Layer 19.jpg](/proxy/?url=https://content.instructables.com/FLZ/8FXI/J674GMOF/FLZ8FXIJ674GMOF.jpg&filename=Temple walkthrough_0008_Layer 19.jpg)
Instructions
- With the small dome selected, make a duplicate of it.
- Move the duplicate of the small dome on top of the opposite column.
- Continue to the next lesson.