Temple: Adding Main Dome
by tinkercad-support in Workshop > 3D Printing
943 Views, 3 Favorites, 0 Comments
Temple: Adding Main Dome
![Temple walkthrough_0005_Layer 22.jpg](/proxy/?url=https://content.instructables.com/FLX/8MXZ/J58FXT16/FLX8MXZJ58FXT16.jpg&filename=Temple walkthrough_0005_Layer 22.jpg)
Instructions
- Press W to choose the Workplane Tool and select the bottom surface of the pointed dome.
- Press CTRL+C to copy the pointed dome to the clipboard.
- Continue to the next step.
Align Workplane to Center Cylinder
![Temple walkthrough_0004_Layer 23.jpg](/proxy/?url=https://content.instructables.com/FGJ/CNF3/J58FXT14/FGJCNF3J58FXT14.jpg&filename=Temple walkthrough_0004_Layer 23.jpg)
![Temple walkthrough_0003_Layer 25.jpg](/proxy/?url=https://content.instructables.com/FBL/6I4B/J58FXT13/FBL6I4BJ58FXT13.jpg&filename=Temple walkthrough_0003_Layer 25.jpg)
Instructions
- Press W to choose the Workplane Tool and select the top surface of the column.
- Press CTRL+V to paste a copy of the pointed dome on top of the column.
- If the dome is pointing down, rotate it so that it is pointing up.
- Continue to the next step.
Scale the Dome
![Temple walkthrough_0001_Layer 27.jpg](/proxy/?url=https://content.instructables.com/FPY/M8JG/J58FXT0W/FPYM8JGJ58FXT0W.jpg&filename=Temple walkthrough_0001_Layer 27.jpg)
Instructions
- Scale the pointed dome to fit the large cylinder.
- Move as needed.
- Continue to the next step.
Congratulations!
Congratulations!! You Finished!!