Tea Tester 2.0
intro, have you ever think that you need something to test for tea so you can always drink at the right temperature?
the tea tester 2.0 is going to make sure that you won't get cold tea or burn your entire kitchen.
in the second version there is a speaker that make sure to remind you when you need to change, when the speaker change its sound it tell you that it is in a new phase so you won't forget about it.
Supplies
to do this you need:
Arduino board
Arduino cable Breadboard
Electric wires
Waterproof temperature sensor
2 LEDs with different colours
3x 150Resistor
Arduino speaker.
Step:1 Get the Item You Need.
to do this you need:
Arduino board
Arduino cable Breadboard
Electric wires Waterproof temperature sensor
2 LEDs with different colours 3
x 150Resistor
Arduino speaker.
Step: 2 Set Up the Item on the Breadboard
follow the pic on the top
]
Get the Code
Step 3: Boxing
cover the Arduino breadboard with somethings[like a box] and make hole in it where where you pull out the temperature stick, the download wiring and the led from the inside
Step 4: Pay Tribute and Drink Tea
after all of that you are finally done and can drink your tea, but before that pay tribute to the person who originally thought of this idea. go see his page at https://create.arduino.cc/editor/julianvoneinzbern/5100014e-883f-4596-bb76-3446f84e0d90/preview