Tda7560 4X50w
PCB
What you need for made PCB:
PCB +-70x45mm
Marker or nail polish
Scissors
You can do on pcb with holes.
Made PCB (etching)
Water, salt and copper sulphate (you can find DIY stores). Etching is approx. 8 hours if kept warm successful and faster (i use 100ml hot water,4 salt tea spoons, 2 tea spoons).
Salt 60%
Copper sulphate 40%
Be careful with chemicals, after work wash your hands with soap and water.
PCB
Clear PCB with aceton and made holes.
PCB
Electronic parts:
1x TDA7560 (or TDA7386, TDA7384)
1x 10k ohm (brown, black, orange, gold)
1x 47k ohm (yellow, violet, orange, gold)
1x 47uf
2x 0.1uf (code on caapacitor "104")
2x 1uf (code "105")
3x 0.47uf (code "...474...",)
2x 2200uf can be smaller (It operates without capacitor)
AMP
Solder all electronic parts and test.
Maybe next time made new instructables, amplifier TDA7294 bridge 145watt.