Taskboard
![FWFFLT2KUE3KN2T.png](/proxy/?url=https://content.instructables.com/F0C/B81X/KUE3KN2U/F0CB81XKUE3KN2U.png&filename=FWFFLT2KUE3KN2T.png)
Elektronische takenbord waarop je taken kan zetten voor kindjes of gewoon om te onthouden, die je kan afvinken met een ledje.
Supplies
- 6 ledjes
- Batterij (voedingsbron)
- Weerstandjes van 470 ohm
- Draadjes
Circuit in Tinkercad
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/FN0/JJ9G/KUE3KOAM/FN0JJ9GKUE3KOAM.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/F14/2TY8/KUE3KOTJ/F142TY8KUE3KOTJ.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/FX2/UJVP/KUE3KPAG/FX2UJVPKUE3KPAG.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/F37/21VZ/KUE3KPAW/F3721VZKUE3KPAW.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/FZM/Y8H7/KUE3KPBC/FZMY8H7KUE3KPBC.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/FKM/AXFV/KUE3KPBV/FKMAXFVKUE3KPBV.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/FL2/Y8G1/KUO3KXZ7/FL2Y8G1KUO3KXZ7.png&filename=Knipsel.PNG)
- Plaats een batterij van 9V op het circuit
- Plaats er dan ook weerstandjes, ledjes en schuifschakelaars.
- Verbind de draadjes van de positieve kant van de batterij naar een weerstand en doet dat voor alle weerstandjes.
- Verbind dan de andere kant van de weerstand naar een ledje.
- Verbind dan de andere kant van het ledje met de schuifschakelaar ( terminal 1 )
- Dan verbind je (gemeenschappelijk) naar de negatieve kant van de batterij.
- Dat doe je voor alle andere led's.
3D Ontwerp in Tikercad
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/FR0/FBVU/KUE3KR3N/FR0FBVUKUE3KR3N.png&filename=Knipsel.PNG)
![Knipsel.PNG](/proxy/?url=https://content.instructables.com/F10/7A55/KUO3KWMF/F107A55KUO3KWMF.png&filename=Knipsel.PNG)