Tape Converter

converts sound from a standard headphone jack so that you can play it thgough a tape player
Parts


3.5mm headphone jack
magnetic head from old tape player
old tape
magnetic head from old tape player
old tape
Solder

Solder the magnetic head to the jack
Open Up the Tape

first remove the inards, then un-screw all the screws on the tape to open it up.
remove all of the parts
remove all of the parts
Cut Off...


cut off the screw holder thingy, that is in the way of the tape head
Glue


hot glue in the tape head. the tape head goes in the middle "slot"
Done

feeed the wire3 out the top and then close the tape back up. I reccomend testing it before closing it then your done!
Cut Off...
enter longer descriptoin for this step