Tactical Key Chain

Don't you think something tactical would come in handy sometime in your life? Well, this probably would! Follow these steps to make a tactical and tacti-cool key chain ring!

Materials Needed:

• 6 Feet of paracord, any color.
• 1 10cm aircraft cable wire key chain w/ twist screw lock; buy them here: https://www.amazon.com/Generic-Stainless-Aircraft-Keychain-CHOOSE/dp/B01G841NIO/ref=sr_1_9?s=office-products&ie=UTF8&qid=1467050731&sr=1-9&keywords=aircraft+cable+wire
• Desired accessories | I used an empty shotgun shell with 2 holes on opposite sides of the shell and a key on a ring.

Thread the paracord through the metal ring until the paracord reaches its middle, or the 3 ft mark.

lace the inner cord over the outer cord

Hook the cord facing down back up through the back of the crook, which is the aluminum band.

Pull the running ends tightly.

Lace the right running cord over the left running cord.

Hook the right running end backwards and up through the back of the crook, just like the start of the solomon bar, just flipped.

Pull the knot made tightly from both ends.

Lace the left running end over the right running end.

Hook the left running cord facing down backwards and up through the back of the crook, and pull tight.

Repeat steps 6-10 until at least 6-7 inches of each running cord are left.

Create a 2 strand diamond knot with the two cords...

At this point, the Solomon bar should be finished! Sorry if you cannot understand my steps; I'm new to this stuff!

Add your desired accessories to make it even more tacti-cool!

If ever a knuckle duster is needed, then put the Solomon bar across your knuckles, and grip the diamond knot with your thumb! WHAM!