Table Light

So here is an instructable for a great nighttable light. It's easy to make, I use it often and I think you will like it.

You need 4 woodboards which are 20 cm, 7 cm, 0,5cm long.
You also need one woodboard which is 12 cm, 12cm, 1,5cm for the bottom.
4 sticks 4 cm, 0,5cm, 0,5cm
8 very tiny woodblocks
and a light!!!.

This is the pattern for the sides, first you have to make a sketch.

Now you have to copy the sketch and you have to glue it on the woodboards so you can saw better.

You have to saw the woodboards very carefully.!!!!!

If all sides fit together, you can wrap off the paper.

Now you can glue the pieces together, but be careful:-)

Now all the paper must be grinded off.

Now glue one stick in each corner, to hold the board with the light bulb.

Now make a hole in a woodboard and fix the electric part with the light bulb on it. The light bulb has to match perfect in the piece of wood.

Now you have to glue 2 tiny woodblocks in each corner.

Make a rekruiment were the cable matches into and glue it to the bottom.

You need different sizes of drills. Make as many holes as you want.

Now make everything beauty, than you are finished.

You made it! You are finished.If you have any questions please write a comment:-)