TZ -1,000 Knex Ten Shot Pistol

by knexkrazy in Living > LEGO & K'NEX

3757 Views, 6 Favorites, 0 Comments

TZ -1,000 Knex Ten Shot Pistol

HPIM9871.JPG
HPIM9873.JPG
Here it is the one the only TZ 1000!!! This amazing gun has a ten shot magazine that has never jammed over the hundreds of times I have shot it. Also it will shoot 35-40 feet and can pierce a box at 3 feet with one rubber band.

PROS:
Sturdy
light weight
10 shot mag that never jams
can shoot 35-40 feet with one rubber band
can pierce a box at 3 feet with one rubber band
good looking
true triger

cons:
uses a decapetated orange connector.

Tell me what you think

Magazine

HPIM9880.JPG
HPIM9882.JPG
HPIM9883.JPG
HPIM9887.JPG
HPIM9889.JPG
Okay here we go. To start off we are going to build the magazine.

Step 1: build both

Spep 2: build both

Step 3: add white rods

Step 4: add parts you made in step 1

Step 5: add second panel and you are done with the mag

on to the next step >>>>>>

Handle

HPIM9891.JPG
HPIM9893.JPG
HPIM9895.JPG
HPIM9898.JPG
HPIM9900.JPG
Now the the handle.

Step 1: build both

Step 2: build

Step 3: build

Step 4: add yellow and blue rods

Step 5: add both parts

Trigger

HPIM9901.JPG
Okay now this is easy. Just build it

Barral

HPIM9908.JPG
HPIM9911.JPG
HPIM9913.JPG
HPIM9915.JPG
HPIM9917.JPG
HPIM9918.JPG
Now I tried to make this as easy I can.

Just follow the pictures.

In the 4th pic cut where the yellow box is.

Mag Pusher

HPIM9919.JPG
just build

Firing Pin

HPIM9922.JPG
okay last thing to build the firing pin. You need to use the black rod for the firing pin because it is stronger. I mean you don't have to but it will make the gun stronger.

Putting It Together

HPIM9925.JPG
HPIM9926.JPG
HPIM9927.JPG
HPIM9928.JPG
Okay almost done.


Add mag

Add handle

Add trigger

Add ram

Loading and Firing

HPIM9930.JPG
Okay we are done. Now just load the bullets and put the pusher in. It is now done. Just pull back the pin and fire!!!


If you have any questions please use my orange board.