T.K.B.T (The Knex Bear Trap)

Check My Tornado 480 Command V2 too!

This is my latest creation and actaully a very simple one.
Basically, the claw grabs something that hits the blue rod and it just puts it's teeth into it... and hard!

Pros:
-strong
-fun to use
-can trap anything (even my walking-robot)
-a chain so the target can't move
-it keeps it's mouth closed when hit

Cons
-might bite and close when you're setting it

For short:
It's a recommandable Bear Trap.

Update on the Tornado:
It is Posted!!!

This part is for a sturdy bodyframe.

This part is to lock it around something like a tree.

this part is to keep the Trap Ring and the Pole Ring together.

This part is to keep the trap opened until someone or something hits it.

the Rings and the Chain are actually not required (but they make it look nicer), you only need the actual Trap and the Emplacer.

The pictures speak for themselves:

If you have any problems, post a comment on my orangeboard.

This part is kinda tricky and will require some stable fingers.
you need to disconnect the yellow rods so the trap is set.
here, 2 pics on how it should look.

pic 1 connected, pic 2 disconnected.

Weel you've built yourself a knex bear trap.
have freaking much fun!!!