THOR'S HAMMER(Mjollnir) UNDER $7!!!

YO! WHAT'S UP MY FAM??!! IT'S YOUR BOY, TECHFREAK REPORTING!

TODAY(AFTER A LONG LONG BREAK...) PRESENT TO YOU MY ALL NEW PROJECT (WHICH IS VERY AFFORDABLE LIKE USUAL:) ! ) MJOLLNIR UNDER $7!!!!!!!!!

1. PLASTIC JAR (X 2):- $0.67(YOU CAN GET THIS FOR FREE IN YOUR GARAGE/STOREROOM :]])
2. TORCH LIGHT:-$4.04
3. SUPER GLUE.
4. BLACK FOAM SHEET.
5. CUTTER
6. FAUX LEATHER STRIP OR ANY OTHER CHEAP LEATHER STRIP (X 2).
7. SILVER ACRYLIC COLOR.
8. TOOTHPICK.
9. MAKER.

• TAKE TWO PLASTIC JARS.
• CUT THEM THROUGH THEIR MIDDLE.
• TAKE A TAPE OR ANY OTHER ADHESIVE.
• JOIN THOSE TWO LOWER HALVES OF THE JAR WITH THE ADHESIVE, AS SHOWN IN PICTURE BELOW.

• HOLD THE TORCH ON THE PLACE WHERE YOU WANT TO ATTACH IT.
• MARK THE CIRCLE WITH A MAKER.
• USE A CUTTER TO CUT THE HOLD.
• AFTER DOING THESE, PLACE THE TORCH IN THAT PLACE. YOU WILL NOTICE THAT THE LIGHT IS FOCUSED AND IS NOT DIFFUSED.
• TO DIFFUSED IT, STICK SOME TAPE ON THE "LIGHTING-OUT" PART OF THE TORCH AS SHOWN IN THE PICTURE.
• NOW THE LIGHT IS COMPLETELY DIFFUSED!

THE BASIC FRAME IS NOW READY!

• FOLLOW THE DESIGN OF THE PICTURE I HAVE ATTACHED & TRY TO CUT THE PARTS AS YOUR WISH!
• NOW COLOR THEM WITH THE SILVER ACRYLIC COLOR TO GIVE THEM A DASHING METALLIC LOOK!

• LEAVE SOME GAP AS SHOWN.

• AFTER CUTTING THE DESIRED DESIGNS FROM THE FOAM SHEET, ATTACH THEM TO THE BOTTLE AS SHOWN IN THE PICTURE.
• BE CAREFUL WHILE USING THE SUPERGLUE!

• AFTER ALL THE PARTS ARE GLUED, LEAVE THEM TO DRY & GET FIRM!
• AFTER THAT, POUR SOME SILVER ACRYLIC COLORS ON THE GAPS THAT WE LEFT IN STEP 3('CUTTING FOAM SHEET').
• BEFORE THEY GET DRY, WITH THE HELP OF TOOTHPICK, DESIGN THEM FOR DETAILINGS AS SHOWN IN THE IMAGE!(I KNOW IT'S DIFFICULT BUT TRY SO YOU DON'T REGRET AFTER THE FINAL LOOK IS MADE!)

• USE A FAUX(OR ANY) LEATHER STRIP & ROUND IT AROUND THE TORCH.
• ALSO USE A SMALL STRIP & ATTACH IT TO THE LOWER PART OF THE TORCH WITH SUPERGLUE AS SHOWN IN THE IMAGE.
• BE CAREFUL WHILE USING SUPER-GLUE.
• THE FINAL LOOK SHOULD BE SOMETHING LIKE THE ONE IN THE PICTURE.

AFTER THE UPPER PART OF THE MJOLLNIR GETS DRY & THE LEATHER STICKS WELL WITH THE HANDLE, ATTACH THE HAMMER WITH THE HANDLE FOR THE PERFECT MJOLLNIR!

“YEAH, IT’S CALLED THE…MJOLLNIR!”