TEXT Puzzle Made With Tinkercad

This is not an ordinary puzzle. The puzzle pieces are letters that spell TEXT. I got the idea from a puzzle I saw once but it was just with the letter T. Then when the Text contest came up, I had the idea of making it but with more letters. After I worked on it some, I was able to get four T's, four E's, and one X to fit in a square.

I used Tinkercad to make the design for the puzzle. Click here for the link to the puzzle

below are the STL files for the parts and the print settings I used.

1. Bed temp: 65
2. Extruder temp: 200
3. Filament type: PLA+ and PLA pro
4. Support: none
5. Build plate adhesion: skirt

WARNING! I AM ABOUT TO SHOW YOU THE SOLUTION TO THE PUZZLE. IF YOU WANT TO TRY TO FIND OUT THE SOLUTION YOURSELF, PLEASE CLOSE THIS PAGE.

Thanks for checking out this instrctable. Please check out my other projects here and my other Tinkercad projects here If you made the puzzle, please post a picture of it in the comments.