Superman Key-ring (pyrotechnic Style)

Everyone wants to be superman, but most people don't have time for it. So I've come up with the superman key-ring. Next time you feel like saving the world, just whip out this bad boy and all your doors will open, who needs x-ray vision when you have a key to the door?

All you need is a pyrography kit and a circular disk of wood!

I chose to do a superman design but you can pick what you want.

Firstly sketch out your design, I used a colored pencil as it is easier to work with later.

Start out with your border and work inwards this means that you will get a better shape.

I chose to use a long rounded end scriber as I am using this to do the main edges.

You may wish to use any other but personally i think this is the best.

Start by doing the outline, be careful to do this area as this will be on the outside.

I also rubbed out the shading.

I changed the scriber to a thicker one, to do this i unscrewed the other using pliers and screwed the other on.

By using pliers, it ensured I didn't have to wait for everything to cool down.

I used the larger tip to finish the inside, this took a wile as my wood was very difficult to burn and it didn't give the best effect.

To finish i used a scriber to burn my way through to create the hole used for the key-ring.

I also varnished the wood to make it water proof and durable.

Now I can be super man everywhere!!!!!