Super Evil Magnetic Button of Doom
by Mrwaffle in Workshop > 3D Printing
138 Views, 0 Favorites, 0 Comments
Super Evil Magnetic Button of Doom
![IMG_2100.jpeg](/proxy/?url=https://content.instructables.com/FDI/VQQ7/LJWVJ06V/FDIVQQ7LJWVJ06V.jpg&filename=IMG_2100.jpeg)
I made a cool button that is repelled by magnets instead of springs.
Supplies
![IMG_2093 (1).jpeg](/proxy/?url=https://content.instructables.com/FML/B1IE/LJWVJ09U/FMLB1IELJWVJ09U.jpg&filename=IMG_2093 (1).jpeg)
Supplies needed are the printed files (print "button pt3" twice), 10 6x2mm neodymium magnets, and super glue.
Magnets
![IMG_2098 (1).jpeg](/proxy/?url=https://content.instructables.com/FKH/1KOU/LJWVJ06R/FKH1KOULJWVJ06R.jpg&filename=IMG_2098 (1).jpeg)
Once the prints are finished you can glue in the magnets so that they repel one another
Assembly
![IMG_2099.jpeg](/proxy/?url=https://content.instructables.com/FNM/7H19/LJWVJ06U/FNM7H19LJWVJ06U.jpg&filename=IMG_2099.jpeg)
![IMG_2101.jpeg](/proxy/?url=https://content.instructables.com/FEF/Y66R/LJWVJ06W/FEFY66RLJWVJ06W.jpg&filename=IMG_2101.jpeg)
When the magnets dry you can put the button in the box and glue on the walls so that the button is encased.