Super Easy PVC Pipe Gun

This pvc pipe gun can shoot: nerf darts, paper wads, marshmallows, etc.

You will need:
13 inches of 1/2, sch 40 pvc pipe
One 1/2 inch pvc T-joint
One 1/2 inch pvc cap

You need to cut two 3 inch lengths
And one 7 inch length

First get your t-joint and put a 3 inch pipe on the bottom and one In the side.
Then put the 7 inch pipe in the other side of the t-joint

Now put a nerf dart or paper wad in the short side and the blow.