Super Easy Metal Ring
I always have loved ring making (wooden) but I never made one out of metal but with this way almost anyone can make a cheep metal ring. :)
Supplies
-bearing (with an inside diameter slightly bigger than your finger (less that a millimeter)
-flat head screw driver or small chisel
-hammer
-two blocks of wood or a vice
Hammering
put the bearing on top of the two blocks of wood then using the chisel/screwdriver hammer off the bits that hold the balls in place the the balls one by one
Optional Step
you can sand the inside if it’s to sharp and you could polish it if you don’t like the matt finish but I do so I left it