Super Cheap Printer Enclosure for Small 3d Printer Like the Creality Ender 3 Series.

I keep my 3d printer in my basement, where it tends to be cold. So to help prevent my prints from failing, I knew I needed an enclosure. After looking online I noticed that an enclosure was about $100. After spending several $100's of dollars on printing supplies, I thought it would be wise if I came up with a cheaper solution. So here it is. (Now in one of the pictures you'll notice tooth picks pushed into the foamboard, ignore that it didn't work.)

2 Trifold displays(foamboard not cardboard)
Packing tape.
(Optional) stretch wrap.

Line up your two trifold displays with wings folded out.

Line them up then tape both sides.

Stand the trifold displays up and fold into a box shape. Then repeat step 2 on the opposite side.

Line up your "box" with edge of a table in order to get rough right angle corners. Then stretch across the top from corner to corner. Then cover the top with the material of your choosing, I choose stretch wrap.