Super Bowl XLIX Cake Toppers

Here's a simple way to decorate your cake for the Super Bowl party - with 3D printed Toppers! Just 3D print the files added in the steps below and serve your delicious cake/food like sandwiches with Toppers.

These 3D printed Topper with Cup cakes are perfect for tailgates for the big game!

Follow the great recipes/ible's on instructables.com and wow! your guest's for the super bowl party.

Creating the 3D printed Topper was super easy, I used the same technique from another ible that I wrote a couple of weeks ago , that is - "Autodesk 123D design- Create a Customizable Lamp/Pen Stand" .

Download the 3D printing software that you printer supports, in my case i am using the Printrbot Simple Metal which use Repetier-Host as a software to

• Slice the STL files attached, which basically means cutting the part into various layers
• And send commands to the 3D printer while printing

Download the STL file attached and load it in your printer software and slice the file, based on your printer setting

• Slicing the STL file should take about 2 seconds
• And the print time should be about 5 -7 mins

Download the STL file attached and load it in your printer software and slice the file, based on your printer setting

• Slicing the STL file should take about a second
• And the print time should be about 7 -8 mins

Download the STL file attached and load it in your printer software and slice the file, based on your printer setting

• Slicing the STL file should take about a second
• And the print time should be about 6 -7 mins

Congratulations !! your Toppers are ready to be pinched onto your cake/food.