Sugru Ipod Touch Stand

by alpha wolf in Circuits > Apple

2589 Views, 14 Favorites, 0 Comments

Sugru Ipod Touch Stand

PA104518.JPG
I always hated haveing to hold my ipod when watching a film or video so after seeing sugru I decided to try to make one myself. If you like this instructable then please vote.
Thanks.

What You Need.

PA074454.JPG
To make the Ipod/Iphone stand you will need:

2x 5g packs of sugru.
1x scisors.
1x Ipod/smartphone.

Construction

PA074459.JPG
PA074460.JPG
PA074461.JPG
PA074462.JPG
PA074469.JPG
First you need to open the 1st packet of sugru and roll it into a sausage shape.
Then you will need to shape it around the ipod with some out of the back for support.
After that you will need to squash it into a more solid shape like a cradle (make sure its deep
and enough to hold the ipod sucrely and make sure the sugru fits around the ipod snugly .
Remove the ipod.
 Then repeat with the second pack.
Finally leave it to cure for 24 hours.

The Finished Product.

PA104519.JPG
When the sugru has cured put it on a flat surface and then put you ipod in the stand.
And there it is a ipod stand to watch your movies on.