Succulent Tray
![IMG_6459.jpg](/proxy/?url=https://content.instructables.com/F0H/Q5LL/ION6P4YJ/F0HQ5LLION6P4YJ.jpg&filename=IMG_6459.jpg)
I found some succulents at a good price and had to have them. I got them home and realised I didn't have any suitable dishes to put them in. I didn't want them to leak out the bottom onto the table when watered. I wasn't too fussed about the table getting wet as it is a homemade rustic table that would have no problem with getting wet but there are gaps in the planks where water would go through onto my nice glittery storage boxes I have underneath. These are not so hardy.
I got my partner to look through his scrap pile that he has at his yard to see if he had anything I could use.
He found a small utensil tray that had been screwed on a barbecue to hold cooking utensils. It is the perfect size but was a little dirty.
What I used:
Barbecue tray
Marker pen
Coin
Car spray paint
Grinder
Cardboard box
Bath Time
![IMG_6451.jpg](/proxy/?url=https://content.instructables.com/FQ2/Z5MT/ION6P40N/FQ2Z5MTION6P40N.jpg&filename=IMG_6451.jpg)
![IMG_6452.jpg](/proxy/?url=https://content.instructables.com/F1L/RHG7/ION6P47J/F1LRHG7ION6P47J.jpg&filename=IMG_6452.jpg)
As you can see it is in need of a little TLC.
I gave it a good wash first and made sure it was properly dry. Pity about the screw holes where it had been attached to the barbecue.
Rounding the Corners
![IMG_6453.jpg](/proxy/?url=https://content.instructables.com/FS7/US1C/ION6P4EK/FS7US1CION6P4EK.jpg&filename=IMG_6453.jpg)
![IMG_6457.jpg](/proxy/?url=https://content.instructables.com/FRJ/9IQD/ION6P4NR/FRJ9IQDION6P4NR.jpg&filename=IMG_6457.jpg)
I decided I didn't like the sharp corners so I used a battery angle grinder to take them off. I used a marker and a coin to mark how far to grind down. It says on the disc 'use eye protection' I didn't, it was silly of me, I will remember to do so next time no matter how small the job.
Spraying
![IMG_6460.jpg](/proxy/?url=https://content.instructables.com/F2G/GAA9/ION6P54N/F2GGAA9ION6P54N.jpg&filename=IMG_6460.jpg)
![IMG_6462.jpg](/proxy/?url=https://content.instructables.com/F6B/9W8O/ION6P5D8/F6B9W8OION6P5D8.jpg&filename=IMG_6462.jpg)
I used Simoniz acrylic car spray paint, I am not recommending it, it is just what I happened to have around. I put the tray in the cardboard box so that I didn't get spray paint on anything else. I went into the garden to do this bit. I stood so the breeze would take the fumes in the opposite direction as the paint smells pretty bad. Here it is after one coat, I gave it a second coat after approx half hour. It dried pretty quick and had the plants in the tray within the hour.
Finished
![IMG_6464.jpg](/proxy/?url=https://content.instructables.com/FZZ/07YG/ION6P5RI/FZZ07YGION6P5RI.jpg&filename=IMG_6464.jpg)
Here they are in the tray. I think it looks much better cleaned up and is perfect for the job. I do like to see what I can re-purpose before I buy something.