Stuck Clock Button & Blown Light on a 2001 Accord

Clock on friends car never worked. Can't see at night and the hour adjust button is stuck in !

Very annoying, hour keeps advancing every second ....

Slip a small screw driver around the clock perimeter, gently pry open the tabs and slip out the clock.

Squeeze the tabs down and pull out the connectors for hazard light and clock

I knew ahead there's gonna be small, delicate electronics, so might as well remove the switch for more room. Simply squeeze the tabs in and push the switch out

Use same small screw driver and pry open the four tabs

Four screws held down very tight ! The grey bulb just pushes right out

My son did this part: We tested on multi-meter that center lead is for instrument consoles. Solider 2" wire to them, add a resistor to step it down to 3V

Theres absolutely no room with cover on,so we notch the side and bend the LED back in. Test to ensure light goes on only when rest of instrument lights.

With the IC board tested, pop out the 3 buttons and clean with water/alcohol swabs

The IC board needs to be tight against the conducting rubber. I needed a vice grip for extra torque

Make sure clock and light works before popping things back in reverse order.