Stripper Tube

Hello, our names are Emiliano, Riboldi, Maria Ignacia, Andres and Maria Jose, students of Panamerican school and inventors of the best product ever. The machine that we invented is the strip tube and was based on these big machines with a huge amount of money that flies around you while you try to grab as much as you can, But the purpose was this to invent a machine that can be used in game shows and in fairs while making a huge amount of money. This first version was a prototype but eventually a bigger version will be available. 

Materials:

Water bottle

Paper

Markers

Fan

Battery

Copper tape 

Cables

Cutter

Scissors

Mesh

Where did we get the materials form?

The water bottle was brought from Maria Ignacia's home

Paper was found in the maker space

Markers were brought from home

The fan was given by the teacher

The battery was given by the teacher

The copper tape was given by the teacher

The cables were given by the teacher

The cutter was found in the maker space

The scissors were found in the maker space 

The mesh was found inside a speaker and was removed

The first step to building a stripper tube is to find all the materials needed and get them read. (Listed above)

Cut the top of the plastic water bottle with the cutter.

Draw and/or paint the paper with the markers on both sides of the page. Then, cut the piece of paper into strips and later into rectangles. This will make the money.

Add all the pieces of paper into the dry water bottle and connect the open part to the speaker’s mesh.

Connect the fan to a battery using cables or copper tape and make sure that it does work.

Finally, put the fan under the other side of the mesh and turn it on. (The fan should already be working and connected to a battery.) This should make the fan start and the papers will fly inside the water bottle.