Streamline Dart Mod

This mod adds a little extra distance and power to a dart that you might need to fire. Please read the notes, they have important information in them!!

You will need:
a dart(duh)
a cutting tool
hot glue gun
sharpie(optional(to mark the darts))
(\_/) (read the notes!)
(  '.') /
((")(")

Start with the little hole on the side of the dart tip. Get your cutting tool into the hole, then cut down the tip to the other side. Refer to the other pic for the finished step.

Insert the tip of the hot glue gun and fill the tip with hot glue. Don't be a clean freak, excess over the top is good, so it is filled all the way. Just wipe it off.

Just make lots more and have something to shoot! Good Luck!