Strawberry Pineapple Mocktail

by Hello Kitty in Cooking > Cocktails & Mocktails

17120 Views, 64 Favorites, 0 Comments

Strawberry Pineapple Mocktail

DSCF7846.JPG
DSCF7847.JPG
DSCF7848.JPG
This mocktail recipe utilizes the pineapple to make a beautiful drink that looks great, tastes wonderful, and is really easy to make!

Gather Your Ingredients

DSCF7793.JPG
DSCF7792.JPG
DSCF7794.JPG
DSCF7797.JPG
You will need:
Strawberry Daiquiri (frozen mix, preferably)
Pineapple
Ice
Colored Straws

Also, you will need a sharp knife, a blender, some kind of scoop for the pineapple (an ice cream scoop works well, or alternately, a strong spoon) a pitcher, and a cutting board.

Start with premixing your Strawberry Daiquiri, and crushing your ice.

Mix Ice and Strawberry Daiquiri

DSCF7800.JPG
DSCF7801.JPG
DSCF7802.JPG
DSCF7813.JPG
Pour just enough Strawberry Daiquiri into the ice to wet the ice (see pictures). Blend well.

Cut the Pineapple and Add It to the Blender

DSCF7803.JPG
DSCF7804.JPG
DSCF7805.JPG
DSCF7806.JPG
DSCF7808.JPG
DSCF7809.JPG
DSCF7810.JPG
DSCF7812.JPG
DSCF7821.JPG
DSCF7813.JPG
DSCF7814.JPG
DSCF7815.JPG
DSCF7816.JPG
DSCF7817.JPG
DSCF7819.JPG
DSCF7820.JPG
Cut your pineapple in the appropriate place (see pictures), making sure to leave enough for the top for later.

Now scoop all the yummy pineapple from the center of the pineapple, making sure to save the pineapple you scoop out. Also make sure not to scrape the sides too much, as the outside skin itself is not tasty.

Now add about half of what you scooped from the pineapple to the blender and mix it all up. Add more ice and strawberry daiquiri as needed.

When you get down to almost the bottom of the pineapple, there should be a slight bump at the bottom. You will need to cut this out (but don't add this part to your drink).

Prepare the Top of the Pineapple (optional)

DSCF7833.JPG
DSCF7834.JPG
DSCF7836.JPG
DSCF7837.JPG
DSCF7838.JPG
DSCF7840.JPG
DSCF7843.JPG
DSCF7842.JPG
You want to be able to put two straws through the top, right? Then this step is for you!

I found that using a bottle opener worked well for marking the exact spot you want to cut through, but a paring knife works, too.

Decide where you want your straws and make a mark in each spot. Cut through the spot with your paring knife and hollow it out.

Repeat with the other hole.

Pour and Serve!

DSCF7822.JPG
DSCF7824.JPG
DSCF7825.JPG
DSCF7826.JPG
DSCF7828.JPG
DSCF7829.JPG
DSCF7830.JPG
DSCF7832.JPG
DSCF7844.JPG
DSCF7845.JPG
DSCF7846.JPG
DSCF7847.JPG
Pour your now yummy drink mix into your hollowed pineapple.

Put your straws directly into the pineapple and set the top on the edge, or, alternately, insert the straws through your pre-cut holes in the pineapple top, and set the pineapple top on top of the pineapple (this is where it belongs:).

Serve and Enjoy!