Strawbee Hex

Maker Name: Lokesh

Location : Banjarapalya E4D Makerspace

I made this Strawbee Hex project for build night with strawbee.

Materials :

Straws-30

Strawbee(660)

Strawbee(154)

Strawbee(66)

First you need to take 6 straws and 6 (66) strawbees then next make a circle shape as shown in the image. You need to make same thing again totally you need 2 circle shapes.

Then next you need to make Hex for that you need to take 6 straws (66) 1 strawbee and 6 (154)Strawbee then next fix it as shown in the image. Remember (66) strawbee should be in the middle of the Hex. put one (660) strawbee middle of the (66) strawbee.

You need to make same type of hex again as shown in the image. Remember totally we need two Hex model.

To make pillers you need to take other 6 straws and 12 (154)strawbees then next fix it to the both sides of the straws as shown in the image.

Then next take all the pillers and fix it to the circle shape as shown in the image.

After fix the pillers you need to fix the Both Hex to the model as shown in the image.

Take another one straw and 2 (660) strawbees and fix to your model as shown in the image.

Finally your ¨Strawbee Hex¨ is ready.