Straw LED

To make this USB LED.

1. a white LED and 220 Ohms resistor.

2. get two drinking straws (or more) and insert it together (u may need to make a small cut for easily inserting).

3. solder the LED, resistor and the USB cable.

U can watch the video also.

You can change this USB LED to battery powered.

The switch can be fixed on the battery holder or hide a reed switch in drinking straw and using small magnet to control on/ off.

This small Straw LED can also be used on hat design (like a snail or Anglerfish), or party purpose also.