Stone Flowerpot
For this one u need almost nothing and still have a nice project.
DIY flowerpot.
With this diy everything is possible, depending on the stone or the way of carving you get a whole new design
DIY flowerpot.
With this diy everything is possible, depending on the stone or the way of carving you get a whole new design
Tools
Cutting
Begin with cussing out the form of the hole.
I chose a rectangular cutting.
Then you should remove all you can with the chisel.
After that, you repeat the process till you are deep enough.
I took off the protection of the disk cutter... NOT RECOMMENDED FOR SAFETY, but you can go deeper. Be shure always have goggles for protection.
I chose a rectangular cutting.
Then you should remove all you can with the chisel.
After that, you repeat the process till you are deep enough.
I took off the protection of the disk cutter... NOT RECOMMENDED FOR SAFETY, but you can go deeper. Be shure always have goggles for protection.
Planting
Now you can plant your favorite plant!
You can make a hole underneath to drain the water if needed.
Have fun!
https://youtu.be/CsKtI7jZeBo
You can make a hole underneath to drain the water if needed.
Have fun!
https://youtu.be/CsKtI7jZeBo