Stefans, the Easy Way
Is your mind boggled by all the complicated Stefan designs? New to making Stefans? Well this Instructable might just be for you! I will be covering how to make blanks, straightening said blanks, and weighting them.
Materials
A knife, 1/2 foam backer rod or caulk saver, airsoft BBs, hot glue gun and glue, and a piece of 1/2 CPVC cut to the length of the Stefan you want.
Cutting
Slide your FBR into the pipe, do not let any hang out of one side, cut off the rest on the end as shown. Now push it out.
Straightening
Place your blanks in a pillow case, and tie it. Put it in the dryer. Set it to medium heat, for 15-20 minutes. When it's finished take the, out of the dryer.
Weighting and Stuff
Burn a hole in the center end of your blank with the glue gun. Now place a BB in it, next glue over it. Let it dry.
The End
Now load them into your Nerf gun, blowgun, or whatever. And as always, have fun, and stay safe! Note, these require the barrel post, or a barrel mod to work in Nerf blasters