Steampunk Spectacles

by gogglerman in Craft > Costumes & Cosplay

30973 Views, 343 Favorites, 0 Comments

Steampunk Spectacles

1 (5).jpg
IMG_0739.jpg
IMG_0740.jpg
IMG_0741.jpg
IMG_0742.jpg
IMG_0736.jpg
IMG_0744.jpg
IMG_0743.jpg
IMG_0745.jpg
IMG_0746.jpg
IMG_0747.jpg
IMG_0688.jpg
IMG_0689.jpg
IMG_0691.jpg
IMG_0692.jpg
IMG_0693.jpg
IMG_0695.jpg
IMG_0696.jpg
IMG_0697.jpg
IMG_0699.jpg
IMG_0700.jpg
IMG_0701.jpg
IMG_0708.jpg
IMG_0704.jpg
IMG_0706.jpg
IMG_0707.jpg
IMG_0703.jpg
IMG_0721.jpg
IMG_0709.jpg
IMG_0705.jpg
IMG_0712.jpg
IMG_0713.jpg
IMG_0711.jpg
IMG_0714.jpg
IMG_0715.jpg
IMG_0716.jpg
IMG_0717.jpg
IMG_0719.jpg
IMG_0720.jpg
IMG_0722.jpg
IMG_0724.jpg
IMG_0725.jpg
IMG_0726.jpg
IMG_0727.jpg
IMG_0728.jpg
IMG_0729.jpg
IMG_0731.jpg
IMG_0732.jpg
IMG_0733.jpg
IMG_0735.jpg
1 (1).jpg
1 (10).jpg
1.jpg
1 (11).jpg
1 (12).jpg
1 (13).jpg
1 (14).jpg
1 (16).jpg
1 (17).jpg
1 (19).jpg
1 (20).jpg
1 (26).jpg
1 (28).jpg
1 (31).jpg
1 (34).jpg
The design, which is based on two cases and two covers broken mechanical stopwatches. The remaining parts are made of sheet brass, 1-2 mm., Brass rod with a diameter of 6-8 mm., Brass wire of 2-3 mm. and tubes of two telescopic antennas. In addition, using four standard screws and two springs.
The processing is performed using hand-held power tools, without the use of machine tools. Permanent connection of parts made with silver solder, using gas torch.