Steampunk - Pipe Lamps,industrial

by oldship in Workshop > Lighting

3301 Views, 89 Favorites, 0 Comments

Steampunk - Pipe Lamps,industrial

20141130_153132.jpg
20141130_153403.jpg
20141130_152459.jpg

Just a few lamps i made from some plumbing materials.

Materials Needed :

IMG_3808.JPG
IMG_3814.JPG
IMG_3810.JPG
IMG_3820.JPG
IMG_3827.JPG
IMG_3819.JPG

glue, some spray paint and the parts on the photo's.

the glas is optionel, just use your own find....

The Wires on the Glas

IMG_3826.JPG
IMG_3830.JPG
IMG_3820.JPG

On the glas vase i made some wire just decoration, its up to you if you want it.

place the rings on the vase like shown, measure the distance, and make at least 4 cupper wires as shown on the picture..

or 6the ..... next is to arange them on one side, then put the glas in the middle and slide them in place...

the smal ring i glued on one of the glas vases is just another decoration....

Preparing the Glas

IMG_3811.JPG
IMG_3812.JPG
20141130_153445.jpg
20141130_153417.jpg

make a hole the size of the fitting, glue it, also glue the plug in the glas.....

next is to place the lamp socket end connect the wire.... beware there is no damaged wire,,,,,

next thing is to place the glas on the socket and ready.....