Steampunk Heart Necklace!

Today I'm going to teach you how to make a steampunk necklace with a heart shape:

To begin cut the previously drawn templates in a not very thick wood, for this use a bank saw.

Then I removed the paint from a can, and used a small saw to open the can.

Now with a sharpie marker draw the template on the sheet and cut it with scissors.

Having all the pieces of aluminum and wood cut and polished, I proceeded to assemble the sides.

With a few small gears try to get an old finish by polishing them just a little.

Having done this I proceeded to put them in place, and nailed the covers in place.

With small steel nails, very carefully hammer the insoles in place to finish the job.

And that's how the work ended, I hope you liked it.

THANKS FOR VOTING! ;D