Stay Hoodie Stay Cool
![IMG_1481.jpg](/proxy/?url=https://content.instructables.com/FVU/AJ98/JGNWSCTU/FVUAJ98JGNWSCTU.jpg&filename=IMG_1481.jpg)
Have you ever imagine something like you are in a dark room wearing a hoodie and coding?
I used to have a strong wish to be a hacker in my early years.But I never found a way to be one of those legends.
So I chose to dress like a hacker.That's why I want to make myself a coolest hoodie.
I was inspired by the project The Sound Reactive LED Mask.link
Components Lists
![th.jpeg](/proxy/?url=https://content.instructables.com/FP8/V5LD/JH0TNONS/FP8V5LDJH0TNONS.jpg&filename=th.jpeg)
0. EL(Electro Luminescent)
2. Gravity: GPIO Shield for Arduino
3. Gravity: Digital 5A Relay Module
4. Mini Push Button Switch (5 pcs)
5. some wire
Test the Circuit
![bN6oUGq6QEyTwCMuXSEWmA](/proxy/?url=https://content.instructables.com/FT2/CKT8/JGZMFCH9/FT2CKT8JGZMFCH9.jpg&filename=bN6oUGq6QEyTwCMuXSEWmA)
![NxErVbSsQkmcn1hewAgNAQ](/proxy/?url=https://content.instructables.com/FIL/KDUM/JGZMFCG3/FILKDUMJGZMFCG3.jpg&filename=NxErVbSsQkmcn1hewAgNAQ)
![IMG_1483.jpg](/proxy/?url=https://content.instructables.com/FJV/2DU4/JGNWSCY8/FJV2DU4JGNWSCY8.jpg&filename=IMG_1483.jpg)
1. I tried to set a button on the switch (parallel)
2. Once I found it works I used Arduino digit pin and GND instead
3. THEN I can use code to control the EL
SHOWING OFF MY HOODIE
![OP1EALHNSd6FZCr5egunHA](/proxy/?url=https://content.instructables.com/FX2/4NFM/JGZMFCGT/FX24NFMJGZMFCGT.jpg&filename=OP1EALHNSd6FZCr5egunHA)
I did some cutting work to shape the EL
All these steps would just cost u about 2 hours!!!