Static Grass Applicator

by anamarcondes in Craft > Art

3039 Views, 6 Favorites, 0 Comments

Static Grass Applicator

CAPA - PASTA - INSTRUCTABLES - R3.png
APLICADOR DE GRAMA ESTÁTICA | Ana Marcondes
1.png
2.png
3.png
4.png
5.png

Tutorial on how to make a static grass applicator.

For this project you are going to need:

Electric racket

Black Nylon Waterproof Cable Connector Gland 13-18 mm

Static grass

Scenic War

White glue

Silicone glue

Instant glue

Electrical tape

Electric cable

Scissors - Stitch

Soldering iron

Tin wire

Nib pliers

Diagonal pliers

Alligator claw

Container plastic with cover

Sandpaper

Arc saw

Drilling machine

Philips wrench

Telephone battery

Pin

Pen

Acetate

8.png
6.png

Sierra racket

9.png
10.png
11.png

Cut the racket electricity wire. Avoid receiving electric shock.

12.png
13.png

Remove the remainder of the cable using the soldering iron.

14.png
15.png
16.png
17.png
18.png
19.png
20.png

Make a hole for the output of the electric cable

21.png
22.png
23.png
24.png

it is necessary to make a no on the cable on the inner side, to prevent it from releasing the device during use.

25.png
26.png
27.png
28.png
29.png
30.png
31.png
32.png
33.png

weld the new cable

34.png
35.png
36.png
37.png
38.png

Cut part of the Waterproof Cable Connector

39.png
40.png
41.png
42.png
43.png
44.png

Sanding the Waterproof Cable Connector

45.png
46.png
47.png

Weld the ends of the cables

48.png
49.png
50.png
52.png
53.png
54.png
55.png
56.png

Solder the batteries.

57.png
58.png
59.png
60.png
62.png
63.png

Put the batteries in the equipment and weld the electrical part with the racket.

64.png
65.png
66.png

glue the cap with the super glue

67.png
68.png
69.png
70.png

Use the Waterproof Cable Connector as a reference to drill the hole in the pot lid.

72.png
73.png
74.png

Prepare a hole in the acetate.

75.png
76.png
77.png
78.png

Glue the acetate onto the applicator cap to prevent static grass from returning to the electrical part of the equipment.

79.png
80.png
81.png
82.png

Put the mesh of the sieve in the pot.

83.png
84.png
85.png
86.png
87.png
88.png
89.png
90.png

91.png
92.png
93.png
94.png
95.png
96.png
{"context":{"location":{"href":"https://www.instructables.com/editInstructable/publish/EG24AL5JJEK0H5J","origin":"https://www.instructables.com","protocol":"https:","host":"www.instructables.com","hostname":"www.instructables.com","port":"","pathname":"/editInstructable/publish/EG24AL5JJEK0H5J","search":"","hash":""},"jQuery11240851116368147373":1},"selector":"#editor-Object-226"}

97.png
98.png
99.png
100.png

101.png
102.png
103.png
104.png
105.png
106.png
107.png

Site: https://warscenic.com.br/wp/

108.png
109.png
110.png
111.png
112.png

113.png

114.png

Attention, caution when using this equipment!