Starry Night Necklace


Hello,
In this instructuble I will show you how I made this beautiful artsy necklace, of the famous painting Starry Night.
I hope you enjoy it!!
Materiels Needed

.jpeg)
1- A piece of wood : 4mm in thickness.
2- Pencil.
3- Measurements tape or a ruler.
4- Paint Brushes : Flat brush n°3
Round brush n°2/0#
5- Acrylic paint : Phthalo Green
Dark brown
Ultramarine
Lighter blue
Mars Black
Titanium White
Cadmium Yellow Medium
Cadmium Orange Hue
6- Cutter or exacto knife.
Cutting the Wood

.jpeg)
.jpeg)

This step is simple and easy :
First I measured 4cm x 4.5cm on the piece of wood, using the cutter I cut the piece I measured, then I sanded the edges with a sand paper to make them smooth.
Drawing the Starry Night
.jpeg)
.jpeg)



.jpeg)
.jpeg)

.jpeg)
.jpeg)
.jpeg)
.jpeg)
- I started sketching the Starry Night by using a pencil.
- Then I Started painting following this steps :
Step 1: I used a 3/4 inch brush to paint the entire piece of wood blue.
Step 2: I painted the bottom land area with dark blue.
Step 3: I painted the small spirals and the river with light blue.
Step 4: Then I painted yellow circles for base of the moon and the stars.
Step 5: After that I painted small yellow lines along the river and on the light blue spirals.
Step 6: I added smaller orange circles throught the sky for the base of the yellow stars.
Step 7 : Then I added some light ultramarine dash lines in the sky.
Step 8 : Then I painted grasses on the sides of the river with phthalo green.
Step 9 : I painted the black crypress tree in the left then I sketched the lines of the houses.
Step 10 : I painted the houses then added textures in the bottom land area.
- Finally I made a small hole in the upper side of the painting then I put a jump ring in the hole, then I put a waxed cotton cord through it.
I hope you like you, and if you have any question please feel free to ask me
See you in the next instructable.