Star and Feather Wall Decor

Want a fun, upbeat wall decoration? This piece of art is calling your name and it only cost 10 dollars! This step by step process should only take you about 30-45 minutes.

Supplies

Six pieces of paper, a yard of yarn or string, and approximately 8 feathers, scissors, tape, stapler, ruler, and a hole puncher

First, You're Going to Want to Cut of 2.5 Inches From All of the Pieces of Paper to Form a Square.

Make sure you cut off the longer side in order to form a square.

Fold the Squares Into Triangles.

For each square piece of paper, fold them into triangles.

Fold Into Another Triangle.

Next, you want to fold the triangle into another triangle.

Draw 4 Lines.

Draw 4 lines horizontally from the closed edge of the triangle.

Cut Along the Lines.

Cut along the lines and then open up the triangles to make sure there are no more folds.

Tape the Center Sections Together.

Flip and Tape.

Flip to the other side and tape the next two pieces together.

Continue.

Continue this process by flipping the paper each time you tape a new section. Finish the 5 other pieces of paper using these same steps.

Tape 3 Together.

Tape 3 pieces together at the corners. Do the same with the three that are leftover.

Tape the Neighboring Pieces.

Tape the neighboring pieces together in order to make it stable.

Hole Punch.

Hole punch one hole in four of the corners. Make sure that the four corners are in a row.

Cut String.

Cut 4 strings that are 12 inches long.

Add Feathers to String.

Add a little feather, then a big feather, and then another little feather to the end of each string.

Tie Knot.

Tie a knot securing the feathers at the end of the string.

Finish

Use the hole punch to tie the opposite end of the string to the star, making sure the feathers will dangle towards the floor.