Stapler Gun (Office Supplies)

This is a gun made from a stapler , it isn't accurate but it has a long range
Material Required : Scissors ,Working hands , Stapler (any stapler like in the second pic)(i used kangaro HD-10D) and
Toothpicks (ammo)

Use the Scissors to remove the plastic covering .
After removing the covering , you will have to remove the hinge pin (the thing inside red circle in 3rd pic)

obtain the part shown in the picture.
(The yellow thing is the hammer)
Remove the parts.

After removing the parts, Put the spring in the rod first and then the yellow hammer as shown in the picture above.
Note:Be careful while putting the hammer . It can launch because of the spring .

Put the rod back at it's place .(as shown in the picture)

Note:It would be a little difficult to put the rod back at it's place.

Now push the yellow hammer back and load the toothpick.Cut the toothpick if you want to.
The toothpick will get stuck in it (like in the first pic)
To launch the toothpick-Simply push it above (as shown in the second picture)
Enjoy :D
Open the video file to enjoy a preview !!

Keep it away from your eyes. It can misfire
Dont shoot at your teachers and annoying siblings
I am not responsible for anyone's death .
Be careful