Stand for Soldering Iron

Stand for soldering iron, will significantly ease your work while soldering and not only that ... He will work to protect the table surface from damage     http://www.youtube.com/watch?v=FdY7QlHVUFY&feature=player_embedded

-Materials                                                                                                                                             Tools and Supplies:
-White sheet, the minimum dimensions of 130x150 mm,                                                      Needle marking on metal,
0.5 mm thick.                                                                                                                                     Steel ruler
                                                                                                                                                            Scissors for metal,
                                                                                                                                                             Fine metal file,
                                                                                                                                                             Clamp (vise).

Dimensions are given in the technical drawings ... Of course they can be adapted to needs, while respecting the given relationship!

Transfer measures with technical drawings on the sheet with the help of steel rulers and pins for marking on metal.

Cut the rack at the marked lines with scissors for sheet metal.

Then, a fine rasp of metal, break the sharp edge of the stand.

When edges are handled or lowered, there is still only make a folding stand, marked by lines in such a way that we have marked the lines on the plate, which remained after Notching, facing the side stand, which is facing down (the side that can not see!).