Squirrel Baffle

keep squirrels off of your Bird feeder.

the single 4" aluminum vent pipe was to skinny, the squirrels could still climb it.

solution, double them up! get two and snap them together, this gives about an 8" diameter tube.

cut a circle out the diameter of the tube, then cut out the center for the bird feeder pole.

pop rivet 4 small brackets to hold the tip to the tube.

I added duct tape to the inside just as added insurance to keep the joints together.

get our create two to four "L" brackets and a stainless steel house clamp sized for your reader pole.

clamp the brackets to the pole with the ss tube clamp at a height that the squirrels can't jump to.

slide the baffle over the pole and let it rest on the hold up brackets.

add your feeder accessories

tip off with house

sit back and watch the birds eat and the squirrels be frustrated.