Squid Game Origami Flip Toy (Ddakji)
by theCraftyCat in Craft > Paper
46351 Views, 11 Favorites, 0 Comments
Squid Game Origami Flip Toy (Ddakji)
![IMG_20211001_120811[1].jpg](/proxy/?url=https://content.instructables.com/FF1/INPH/KU783FMW/FF1INPHKU783FMW.jpg&filename=IMG_20211001_120811[1].jpg)

I've come here to show you how to make the origami flip toy (Ddakji) that Gi-hun and the train-station guy play with.
Supplies
Colored paper
![IMG_20211001_112909[1].jpg](/proxy/?url=https://content.instructables.com/F7N/AMM3/KU783FH2/F7NAMM3KU783FH2.jpg&filename=IMG_20211001_112909[1].jpg)
Get a 3:2 sheet of paper and crease it along the lies as shown below. I have use a 21x14 cm sheet. So the Ddakji I'll have in the end will be 7x7 square.
![IMG_20211001_112922[1].jpg](/proxy/?url=https://content.instructables.com/FKT/XH4L/KU783FF6/FKTXH4LKU783FF6.jpg&filename=IMG_20211001_112922[1].jpg)
Fold it in half.
![InShot_20211001_133937066[1].jpg](/proxy/?url=https://content.instructables.com/FYQ/97YY/KU783FOZ/FYQ97YYKU783FOZ.jpg&filename=InShot_20211001_133937066[1].jpg)
Make diagonal folds as shown in the figure above. You will need two such shapes so repeat the steps 1, 2, and 3 with another 3:2 sheet of paper.
![IMG_20211001_120323[1].jpg](/proxy/?url=https://content.instructables.com/F7O/6O3E/KU783FH5/F7O6O3EKU783FH5.jpg&filename=IMG_20211001_120323[1].jpg)
Place the two shapes you made as shown below.
![IMG_20211001_120427[1].jpg](/proxy/?url=https://content.instructables.com/F1H/611Q/KU783FKX/F1H611QKU783FKX.jpg&filename=IMG_20211001_120427[1].jpg)
Next, fold the top flap onto itself.
![IMG_20211001_120445[1].jpg](/proxy/?url=https://content.instructables.com/FZ5/ATLR/KU783FMT/FZ5ATLRKU783FMT.jpg&filename=IMG_20211001_120445[1].jpg)
Then fold the left flap over it.
![IMG_20211001_120528[1].jpg](/proxy/?url=https://content.instructables.com/FO6/YJH4/KU783FMU/FO6YJH4KU783FMU.jpg&filename=IMG_20211001_120528[1].jpg)
After that, fold the bottom flap over them both.
![IMG_20211001_120720[1].jpg](/proxy/?url=https://content.instructables.com/F5G/D5XZ/KU783FMV/F5GD5XZKU783FMV.jpg&filename=IMG_20211001_120720[1].jpg)
Finally, slip the pointed edge of the remaining flap into the little pocket indicated by the arrowhead.