Spur Gear Glass Cored Pendant

by sdiwan in Craft > Jewelry

449 Views, 3 Favorites, 0 Comments

Spur Gear Glass Cored Pendant

IMG_20150321_203254.jpg
IMG_20150321_193956.jpg
IMG_20150321_203549.jpg
I've always wanted to contribute to instructables.com. everytime I made something, i just could'nt take photos of the project in it's developing stage. I'm also lazy enough not to recreate them. this project was specifically done for the instructables.com.

please do comment and share your views about the presentaton. help me improve. i'll be sharing more projects and diy's in future.

Acquire Spur Gears.

IMG_20150310_145216.jpg
IMG_20150310_145234.jpg
IMG_20150317_201237.jpg
IMG_20150317_201223.jpg
IMG_20150317_201252.jpg

get some spur geas. maybe frome a motorbike repair shop. i got 'em from a local mechanic for 30INR (about $0.5).

clean 'em!!!

I cleaned them using WD-40. you may choose any solvent.

Make 'em WEARABLE!

IMG_20150310_145253.jpg
IMG_20150310_145244.jpg
IMG_20150317_193451.jpg
IMG_20150317_194149.jpg
IMG_20150317_194158.jpg
IMG_20150317_195255.jpg

bike gears mostly have some projections and extra materials on them.

machine them on a lathe or a surface grinder. i turned them on a lathe.

WARNING!gears are super hard. use suitable tool!!

Something to Hang on to !!!

IMG_20150319_211423.jpg
IMG_20150319_211440.jpg
IMG_20150321_162949.jpg
IMG_20150321_165617.jpg
IMG_20150321_171249.jpg
IMG_20150321_172454.jpg
IMG_20150321_172436.jpg
IMG_20150321_172441.jpg
IMG_20150321_173709.jpg
IMG_20150321_174041.jpg
IMG_20150321_190115.jpg
IMG_20150321_190120.jpg
IMG_20150321_190128.jpg

tried to drill a hole on the gear but failed. gears are super hard!!

used some copper wires to form a hook.. the outcome was interesting!!

gave a thought to melt some glass in the centre...

the flame was so intense, the copper came off insted..!!:(

i put a steel ring and melted some glass in the void...

Patience!!

IMG_20150321_191342.jpg

this step was completely missing during the creation of the pendant...

do wait for the molten glass to cool...

do not open a compressor's drain valve on it...

the glass might crack...

Glass chips were melted using industrial oxy-fuel cutting torch.