Spoon Man
Today I'll show you how to build the spoon man.
If you need a fancy holder for your smartphone or something else, this is just the right thing.
All you need is a little bit cutlery (large and small spoons), 2 small screws and a few tools.
WATCH the tutorial on YouTube : How to build a spoon man !
Visit my Facebook-Fanpage !
https://www.facebook.com/ehlerstv
and / or ....
follow me on Twitter:
https://twitter.com/Ehlers_TV
The song:
"Hyperfun" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/
You Need:
- 3 big spoons
- 2 small spoons
- 2 little bolts (M4 or M5)
- 2 nuts for the bolts
- drill (for the holes / size of the bolts)
Spoons
Take the spoons and put the same sizes together.....2 small ones together....and the 3 big ones together....
Bore the Big Ones
Bore through the big ones....as you can see at the pics.
Pad use voluntarily !
ATTENTION : One of the 3 get two holes....( SEE: last three photos of these step)
Bore the Small Ones
Bore through the small ones....as you can see at the pics.
Pad use voluntarily !
Put the Big Ones Together
Put the 3 big ones togehter.....with one bolt and one nut, as you can see one the photos.
ATTENTION: The big one with the 2 holes on the TOP !
....when you are ready, pull them apart, that it looks like a " Y " ....the one with the 2 holes is the single !
The Little Ones
Turn the big ones ( Y ) around.
Take the 2 small ones, one bolt and one nut and attach it to the upper hole.
Spoon Bend
Bend it as you can see at the pics....
LET'S GO, SPOON MAN !
Ready.
You can stand him now and bend him towards how you need it.
If my guide was NOT easy to understand, watch the Video (on TOP).