Spooky IT

This spooky character will be a great host at any Halloween party! Create him with these simple steps!

For this project you will need:

-Wire tomato cage

-Hula skirt

-Wire cutters

-Elastics

-Black velvet hat

-Black google eye glasses

You can purchase most of these items from any dollar store.

First, you will need to measure the hula skirt to the tomato cage to see how much you will need to cut off the top. Once you have measured, take your wire cutters and cut off the top of each wire to your desired length. If the cutters do not cut all the way through, then bend the wire back and forth until it snaps.

Next, take one of your elastics and wrap it around the top of the wires to hold them together.

With your hula skirt, place it on the top of the cage and continue to wrap it around until it is fully covered. Use another elastic to wrap around the top of the skirt and secure it together.

Take your hat and place it on top. It should stay sitting by itself, or you can glue it to keep it held down.

Finally, take your glasses and put them on the front of your IT. If you bend the arms of the glasses down it should hold them in place, however you can hold it in place any way you want.